7
RK36 KEYPAD
10
ARMING
PLEASE NOTE:
ARMING THE
SYSTEM TO
NIGHT:(OPTIONAL)
PUSH THE # OR H
KEY AGAIN.
FORCE ARMING
THE SYSTEM:
F1
F2
STATUS
MONITOR
POWER
STATUS
HOME
AWAY
GREEN
YELLOW
RED
GREEN
LED will not light and you will hear the system say
ZONES OPEN over the phone or through the speaker
which indicates that the system did NOT arm.
See "Force Arming" to continue.
3. Arming the system to NIGHT: (Optional)
Arm the system to HOME mode.
(See item 2)
Push the
#
or
H
key again.
The green AWAY LED will light with the red HOME
LED and the system will say
ARMED TO NIGHT
over the phone and/or through the speaker. When
armed to the NIGHT mode, the perimeter entry delay
zones become instant and your installer may program
some interior zones to be active. If you wish to return
to the HOME mode, simply push the
#
or
H
key any
time the system is in the NIGHT mode.
4. Force Arming the system:
If you attempt to arm the system to either HOME or
AWAY but you hear ZONES OPEN over the phone
and/or through the speaker and notice that neither the
HOME LED nor the AWAY LED has come on, the
system is NOT armed. However, the system can be
FORCE ARMED.
Push the
#
or
H
or
*
or
A
key a second time within 10
seconds. If arming to HOME, the red HOME LED will
now light and FORCE ARMED TO HOME will be
heard indicating that the system is now ARMED to
HOME. If arming to AWAY, the green AWAY LED will
now light and FORCE ARMED TO AWAY will be
heard. When FORCE ARMED either to HOME or
AWAY, the yellow STATUS LED will be lit. You can
find out which zones are open by requesting system
status.
PLEASE NOTE:
When you FORCE ARM your system,
security is compromised because the open zone will
be ignored by the system. Check with your installer to
determine how the open zone will again be part of the
system.
Zones which operate 24 hours a day such as FIRE and
PANIC are always armed and take priority over all
other types of protection in the system.
RK36 KEYPAD - LED's and SPECIAL KEYS
POWER
STATUS
HOME
AWAY
NIGHT
STATUS
MONITOR
F1 and F2
BACKLIGHT INTENSITY
You can control the brightness level of the key backlight-
ing. The simultaneous depression of the
4
and
7
keys will
step the backlighting through
7
different levels. Press
4
and
7
simultaneously a number of times until the back-
lighting is totally off. We will define all backlighting off as
level 1. Levels 2 through 7 will take the key backlighting
through 6 progressively brighter levels.
These key's functions are programmable and will be
explained by your installer.
F1
________________________
F2
________________________
Pressing this key toggles the system between the three
possible monitor conditions.
Monitor On
- System will announce doors and
windows when opened.
Monitor Off
- System will not announce doors
and windows when opened.
Beep
- System will beep when doors and
windows are opened.
Pressing this key will cause the system to immediately
speak system status.
Both HOME and AWAY LED's are on when armed to
NIGHT. Press
H
any time system is armed to HOME to
change to NIGHT. Pressing
H
when system is armed to
NIGHT will change arming back to HOME.
On when armed to AWAY. Press
A
to arm to AWAY.
On when armed to HOME. Press
H
to arm to HOME.
Flashing when new information is available, solid after
status has been asked for and spoken, and off when no
information is present.
On when AC or back-up battery power is present. If AC
power is lost the POWER LED will turn off and the
STATUS LED will flash, and the system will speak
"POWER OFF" one time.
