This Manual is applicable to the De Sisti F4.7 Vari-White
Revised on July 2018
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
7.
LOCAL MENU
The SUPER LED F4.7 VW has a GRAPHIC DISPLAY backlit, with two local knobs, each one having a push/click
function in addition to the rotation:
KNOB 1
It is as a DEFAULT the CCT Variation Knob, By rotating it clockwise the CCT
Changes from 2.750°K up to 6.900 °K. If such a knob is kept pushed, it
provides a FAST ACTION on the KNOB 2 which is normally the DIMMING
Display
It is a Graphic, backlit LCD Display. It contains all the relevant information for the
product setup and performances, such as CCT, DMX Address, DMX Level, LED
Temperature and local dimming.
When the local knobs are not used for more than
5 seconds the display back illumination will go OFF and the display itself will go in
STAND BY Mode. It will go ON again anytime a KNOB is activated.
KNOB 2
It is as a DEFAULT the DIMMING Variation Knob, By rotating it clockwise the
Dimming of the Light Changes from 0up to Full Light Output. If such a knob is
pushed, it has the selection or enter function to, for instance, enter into a Menu
DEFAULT SETTINGS ARE INDICATED IN BOLD LETTERS ON THE FOLLOWING TABLE:
The following are the BASIC FUNCTIONS and COMMANDS that are provided on the LOCAL MENU of the LED FRESNEL. The unit is provided
with a USER MENU accessible instantly on the product.
DMX ADDRESS
This Function is to SET the
DMX address
from
1
to 512
The Product is delivered with a default setting of the DMX address at 1.
As indicated next to each picture, it is required to reach the DMX
addr Menu, select the preferred base DMX Address and Select
it.
Once the DMX Address is SET, in order to return to the MAIN
MENU, it is necessary to rotate KNOB 2 counter-clock-wise to
return to the EXIT item and then select it by pressing KNOB 2
itself.
1st menu displayed
2nd menu displayed
Explanation of each menu function
