background image

                                                                                                                   

 

This Manual is applicable to the  De Sisti F4.7 Vari-White 

 

Revised on July 2018 

ILT ITALY srl 

Via Cancelliera, 10/a  
00041 Albano Laziale (Rome) Italy 
tel. +39 06-902901 fax +39 06-90231051 
www.desisti.it 

 

9. 

PERIODIC INSPECTION & MAINTENANCE 

This product requires very little routine maintenance, if any, but has special cleaning instructions: 

Disconnect fixture from power and allow it to cool for 10 min. 

1.

 

Vacuum or gently blow away any dust from fan blades and grills 

2.

 

Very gently clean the LED with Isopropyl alcohol. 

3.

 

Clean the lenses with a soft damp cloth. 

4.

 

Check the condition of the safety shield (see chapter: Installation Instructions) before every use. 

5.

 

Check Power supply cable and DMX control cable proper conditions 

 

10. 

SAFETY STANDARDS

 

Europe: The product conforms the Applicable European Directives & Standards 

Low Voltage Directive: 

73/23/EEC (as amended by 93/68/EEC) 

EMC Directive: 

89/336/EEC (as amended by 92/31/EEC & by 93/68/EEC) 

Europen Standards:: 

EN 60598-2-17, EN 60598-1 , EN 55015 , EN 61547 

 

Disposing of this product: 

Help preserve the environment! Ensure that this product is recycled at the end of its life. 

This product is in compliance with the RoHS and WEEE directives. 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for SUPER LED F14









Reviews: