This Manual is applicable to the De Sisti F4.7 Vari-White
Revised on July 2018
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
Professional use: This luminaire has been designed for professional use and must be operated by qualified
personnel only. Not for residential use.
Grounding:
WARNING: THIS LUMINAIRE MUST BE GROUNDED
Electrical connections: IMPORTANT The cores in this mains lead are colored in accordance with the following
code:
Europe
America
Ground
Green & yellow
Green or green & yellow
Neutral
Blue
White
Live
Brown
Black
In case the colors of the cores do not correspond to the colors of the connection points on your plug, please
proceed as follows:
- the green or green and yellow core must be connected to the connection point marked with the letter E or with
the symbol
or colored in green or in green - yellow;
- the blue (or white) core must be connected to the connection point marked with the letter N or colored in
black;
- the brown (or black) core must be connected to the connection point marked with the letter L or colored in red.
Working conditions
Working Position
Lighting fixture: max. tilting ±90° from horizontal
Ambient temperature, ta at the place of installation
and storage
Minimum 10°C, m40°C
Humidity at the place of installation and storage
25-80% (not condensing)
Minimum distances from inflammable surfaces
Top
Back
Sides
Front
0,2 m.
0,1 m.
0,1 m.
0,75 m.
The luminaire should never be OPERATED close to inflammable materials. The ones indicated in the above
table are the minimum distances recommended. Other requirements for safe use are:
A.
Do not cover the apertures of the luminaire housing. They are essential for correct ventilation
B.
Use only original accessories and spares from De Sisti Lighting
C.
Before hanging the luminaire ensure that the suspension point (or the stand) is properly rated to accept the
luminaire weight.
D.
In case of pole operated use, fit only a P.O. stirrup from De Sisti Lighting.
E.
A suitable secondary safety suspension device (safety cable, chain or equivalent) must be fitted between the
suspension point and the eyelet at the front of the body
WARNING:
Disconnect Power CORDS before
any maintenance work or opening the FUSE
HOLDER.
RISK OF SERIOUS INJURY.
