This Manual is applicable to Soft LED 2 Vari-White
Revised August 2018
7.
CHARACTERISTICS AND PERFORMANCE DATA
DESCRIPTION
VALUE
DESCRIPTION
VALUE
Ü
LED Power
120 W
Ü
Protection Type
IP 22
Ü
Power
Consumption
140W @230V / 150W @ 120V
Ü
Max Housing temperature
70 °C
Ü
DMX Data link
USITT DMX512-A
Ü
5-pin XLR for DMX in & out.
Ü
Use shielded data cables. Do not
overload the daisy chain.
Ü
Up to a maximum of 32 devices can
be used on a single DMX chain.
Ü
Weight of Fixture
With yoke (integrated PSU)
M.O.
P.O.
4,1 kg.
5,3 kg.
Ü
DMX Channels:
Ü
1 at 8bit: Dimmer
Ü
2 at 16bit: Dimmer
Ü
Color Temperature & CRI/TLCI
CRI>95 2800°K from 6600°K
TLCI >96
Ü
Front Fixture’s Opening
Front 30,5 cm.(base) x
14,7 cm. (height) = surface 427 cm
2
Ü
Protection Class
Class 1– ground connection required
Specifications subject to change without notice.
8.
DIMENSIONS
9.
PERIODIC INSPECTION & MAINTENANCE
This product requires very little routine maintenance, if any, but has special cleaning instructions:
Disconnect fixture from power and allow it to cool for 10 min.
1.
Vacuum or gently blow away any dust from fan blades and grills
2.
Very gently clean the LED with Isopropyl alcohol.
3.
Clean the Diffuser Panel with a soft damp cloth.
4.
Check the condition of the safety shield (see chapter: Installation Instructions) before every use.
5.
Check Power supply cable and DMX control cable proper conditions
Dimensions: Black=mm.
Red=inches
Dimensions: Black=mm.
Red=inches
