Designsoft TINALab II, Quick Start Manual

Page: 13 / 18

13
GENERIC USER I/O
The following pins can be connected to TINALab II Digital Signal Generator by a ribbon cable
through J2 block header as inputs or can be used freely as generic.
NET "DIn<0>" LOC = "P86";
NET "DIn<1>" LOC = "P87";
NET "DIn<2>" LOC = "P84";
NET "DIn<3>" LOC = "P85";
NET "DIn<4>" LOC = "P80";
NET "DIn<5>" LOC = "P83";
NET "DIn<6>" LOC = "P78";
NET "DIn<7>" LOC = "P79";
NET "DIn<8>" LOC = "P76";
NET "DIn<9>" LOC = "P77";
NET "DIn<10>" LOC = "P74";
NET "DIn<11>" LOC = "P75";
NET "DIn<12>" LOC = "P65";
NET "DIn<13>" LOC = "P66";
NET "DIn<14>" LOC = "P60";
NET "DIn<15>" LOC = "P64";
The following pins can be connected to TINALab II Logic Analyzer by a ribbon cable through J1
block header as outputs or can be used freely as generic I/O.
NET "DOut<0>" LOC = "P118";
NET "DOut<1>" LOC = "P117";
NET "DOut<2>" LOC = "P116";
NET "DOut<3>" LOC = "P115";
NET "DOut<4>" LOC = "P114";
NET "DOut<5>" LOC = "P113";
NET "DOut<6>" LOC = "P112";
NET "DOut<7>" LOC = "P103";
NET "DOut<8>" LOC = "P102";
NET "DOut<9>" LOC = "P101";
NET "DOut<10>" LOC = "P100";
NET "DOut<11>" LOC = "P99";
NET "DOut<12>" LOC = "P96";
NET "DOut<13>" LOC = "P95";
NET "DOut<14>" LOC = "P94";
NET "DOut<15>" LOC = "P93";