L
OCK
K
EYPAD
STOP! Please read instructions before removing
Design House Keypad lock from packaging.
Tools Needed for Installation
Phillips
Screwdriver
Drill
Angle Ruler
Flathead
Screwdriver
Removing Keypad Lock from packaging
1. Unscrew and remove Cover Loop and Plastic Gasket from Interior Panel with provided
tool Wrench.
2. Remove Interior Cover Plate screws (4) to expose Battery Box.
3. Unscrew and remove two mounting screws.
4. Interior and Exterior can be removed from the styrofoam packaging.
5. Proceed with installation of Keypad Lock.
Wrench
(Provided with lock)
Stiletto
(For door hole2-1/8)
Page.2
Chisel
Hammer
R
Keypad Deadbolt Entry
Keypad Lever Entry
Lead Pencil
