background image

Southwire Co. 11290 80

th

 Ave. Pleasant Prairie, WI 53158

   

Upon receipt of the item prepaid with a letter describing the problem, and a check for $7.50 
to cover return postage and handling, the company will, at its option, either repair or replace 
the defective part or fixture at no charge to the purchaser. This warranty does not apply to 
fixtures that have been used for rental or commercial purposes. It does not cover fixtures 
that have been altered in any way or fixtures that have been subject to misuse, accidents or 
damage in transit.   

IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 
DAMAGES. NO CHARGES WILL BE ACCEPTABLE FOR UNAUTHORIZED REPAIRS, PARTS OR 
SERVICE. 

 

Some states do not allow limitations on how long an implied warranty lasts and do not allow 
exclusions or limitations of incidental damages, so parts or all of this warranty limitations or 
exclusions may not apply to you. Legal warranty rights will vary from state to state and you 
may have other rights.   

IMPORTANT NOTICE:

 

Every attempt has been made to deliver a quality product that will give you years of trouble 
free service. In the event that you have problems with the fixture, please 

DO NOT RETURN 

TO PLACE OF PURCHASE. PLEASE CALL THE NUMBER BELOW FOR BULB OR PARTS 
PROBLEMS: 

 

(847) 672-4017 

 

8-5 pm (West Coast time). All warranty problems are handled directly through Southwire Co.   

HOW IT WORKS 

 

Congratulations on the purchase of your motion sensor light with infrared detection. The 
motion detector turns lights on and off after sensing moving heat sources in target area. 
Connected to light fixtures:   

  Use as security light for any unprotected side or corner of house. Lights will be activated 

when intruder passed through target area of sensor.   

  Install as a sensing device to turn lights on as people approach the entrance of your 

home. 

  Functions as welcome light if installed to sense cars entering driveway. 

 

PACKING INCLUDES 

 

INSTALLATION 

CHOICE OF LOCATION 

 

Summary of Contents for L5999







Reviews: