Design Hardware 2000V Series, Installation Instructions Manual

Page: 7 / 7

D D
D
1/4”-20P x 3/4” x 2
ROUND HEAD SCREWS
F
1/4”-20P x 3/4” x 1
FLAT HEAD MACHINE SCREWS
FOLD REVERSELY FOR
TOP STRIKE INSTALLATION
TOP LATCH ASSEMBLY
TEMPLATE(B-1)
LINE W
1 39/64”
”
6
1/
7
2
FLAT HEAD MACHINE SCREWS
CAUTION:
DRILL”F” HOLE AFTER LATCH BOLT
PROPERLY WORKS.
FOLD ON DOTTED LINE
Frame Stop
AND FIT ON DOOR
FRAME
CAUTION:
BE SURE THE DISTANCE FROM DOOR
FRAME TO LINE W MUST BE 2”
Note: When installing top latch assembly:
1. Drill (1) E hole and install screw but
do not tighten all the way.
2. Make sure distance from door frame
to line W is 2".
3. Drill (2) D holes and install and
tighten screws.
4. Tighten screw in hole E all the way.
(A)For 2000V Series (UL Listed)-Drill & tap for (3) 1/4"-20P x 3/4" machine screws (2xD,E) for latches
Drill (3) 7/32" pilot holes (2xD,E) for self tapping machine screws or wood screws for latches.
(B)For F2000V (Fire Rated)-Drill 9/32" holes (2xD,E) inside and 3/8" holes (2xD,E)
outside for the (3) thru bolts.
1 ”
G
1/4”-20P x 3/4” x 2
G G F
E
1/4”-20P x 3/4”
ROUND HEAD SCREW
2”
2012.03
3/32"
Adjust the location of the top
latch assembly and top latch
base so there is 3/32" space
between top strike and inside
of top latch.
CAUTION:
E
TOP STRIKE
TOP LATCH BOLT