DESIGN-AIRE SL-RSR-EC
Installation and Operations Manual
Revision: 28-Jan-16
Page 4 of 15
86 Harry Douglas Dr., Ottawa, ON, K2C 2C7
T: 613-831-8318, TF: 1-888-636-8609
DESIGN FILTRATION MICROZONE INC.
www.dfmzgroup.com
Thank you for purchasing our Design-Aire SL-RSR-EC, with proper care and maintenance your unit will provide
you with many years of trouble free performance. Please read instructions carefully before installing and
operating your Design-Aire SL-RSR-EC.
WARNING: TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS PLEASE REVIEW
THE FOLLOWING PRECAUTIONS.
•
Do not expose your Design-Aire SL-RSR-EC to rain or moisture.
•
Always disconnect the Design-Aire SL-RSR-EC from power supply when servicing, moving parts may
cause serious injury.
•
Always disconnect while grasping the plug, not the cord.
•
Do not expose Design-Aire SL-RSR-EC to gaseous or explosive vapors. Motors normally spark and may
ignite fumes.
•
Do not block airflow to top or back of unit, allow at least 4” above unit
•
Do not modify the plug of your unit if it will not fit in your duplex outlet. Have a proper outlet installed
by a qualified electrician.
•
Use only specified replacement parts recommended by Design Filtration Microzone.
•
Use this equipment only in the manner intended by Design Filtration Microzone.
1. SHIPPING AND UN-CRATING
Design Filtration Microzone assembles and factory tests each unit prior to shipping. On occasion, damage can
occur during the transportation of your new Design-Aire SL-RSR-EC. You should inspect your unit for damage
that may have been caused and report it immediately to your transportation company.
Carefully remove your Design-Aire SL-RSR-EC unit from the shipping carton and remove from plastic bag. Use
extreme caution when handling HEPA filters; do not touch the filter media as damage can easily occur.
All shipments are F.O.B. Design Filtration Microzone. All claims for damage due to shipping should be filed with
the carrier. Design Filtration Microzone and its dealers are not responsible for shipping damages.
Your Design-Aire SL-RSR-EC has been factory tested and set for appropriate airflows, however all HEPA filtered
equipment should be certified by a qualified technician prior to use.