Desert Star Acoustic Release Control System Manual Download Page 28 | Manualshive

Page: 28 / 67

background image

■

Real-time reports of the station battery charge levels

■

State of the release mechanism:

■

”arming the station/releasing the station/station
released”.

■

Real-time distance between the ARC unit and the STM surface
stations sonar transponder while the ARC station is deployed
underwater and when it's on its way to the surface once released.

7. Software, STM, & USB Connectivity to the PC

Desert Star Systems will ship a PC along with the “Acoustic Release Control” software already
installed. When you receive the PC, please power it up, and log-in to the Windows Operating
System. If applicable, the default password for Desert Star Systems customer PCs who buy the ARC
system is

“fish”

without the quotes. Please contact Desert Star Systems customer support if this is

not the default password.

The STM surface station is designed to communicate with the PC via USB cable.

Please follow these steps to connect the STM surface station with the PC already running.

STEP 1:

Before making any connections, please make sure that the power switch on the front panel of the
STM surface station is in the “OFF” position. The PC should be turned on with the Windows 8
Operating System fully booted and ready for the interaction with a user.

STEP 2:

Locate the USB cable included. The STM surface station has a “Type-B” female USB port on the
front panel. Insert the USB cable “Type-B” male connector in to the port on the front panel of STM
surface station.

«
...
26
27
28
29
30
...
»

Summary of Contents for Acoustic Release Control System




































































Reviews:

No comments

Related manuals for Acoustic Release Control System

Brand: HACKADAY Pages: 15

Brand: Armfield Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands