35
4.
Install second angle such that the flange is oriented towards the heater using
the 1/4” nut and bolt provided. Tighten the nut and bolt such that the angle is
held snugly but can still be rotate
Figure 26 - B-Vent second angle flange
5.
Using locking pliers, bend the two angles at their flanges such that they meet
up and overlap. Once in position, use the locking pliers to hold angles
together.
Figure 27 - B-Vent flanges together
Desert Aire - SA Manual
Summary of Contents for SA Series
