9
3.5.1
Schedule
Options
This screen selects the number of occupancy schedules to be active. Setting at
least one allows the occupancy schedule timing to be set from the Current
Schedule Screen. If the number of active schedules is left at zero, no occupancy
scheduling
will
be
active.
3.5.2
Current
Schedule
This screen sets the occupancy timing for the selected day of the week (DOW)
at the bottom of the screen. Select the schedule to modify the start time and stop
time. This is the time band that the unit will be in the occupied mode. All times
are set in the 24 hour format. As the DOW is selected, the UP and DOWN keys
allow for Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday and
any holiday to be occupied during that time. Up to 10 schedules can be active at
any time. These allow for different start and stop times on various days of the
week, weekends or programmed holidays.
3.5.3
Temporary
Holidays
The Temporary Holiday settings are for holidays that change dates from year to
year, such as Memorial Day or Thanksgiving. Up to 10 different temporary
holidays can be set from this screen. Select the number to assign to the Annual
Holiday and then select the Start Date and the End Date for that holiday.
3.5.4
Annual
Holidays
The Annual Holiday settings are for holidays with dates that remain constant
year to year, such as New Years Day and the 4th of July. Up to 10 different
annual holidays can be set from this screen. Select the number to assign to the
Annual Holiday and then select the Start Date and the End Date for that holiday.
3.5.5
Set
Time
This screen allows the time, date and day of week to be set. To modify these
settings, press the ENTER key until the cursor is over the appropriate item and
use the arrow keys until the desired setting is shown. All times are set in the 24
hour format. Pressing the ENTER key will step to the next item. Press the
ENTER key to change the time and date.
3.6
Unit
Revision
The Unit Revision Screen shows the version of the application program that is running
along with the release date of the software. This information should be passed to Desert
Aire in the event a service call is necessary. The SERVICE MENU and FACTORY
CONFIGURATION are accessible only from this screen.
Press the UP and DOWN keys at the same time to display these menus.
Desert Aire - CM35xx Quick Start Guide