Desert Aire CM3550 Series, Installation And Operation Manual

Page: 38 / 58

38
2.3.3.2.4 Zone Reset Settings (Figures 59-64)
Selecting the Zone Reset Settings from the Parameter
Settings Menu displays the Temperature Reset Transition PID
parameters shown in Figure 59. The Transition parameters
are used by the control system every time the transition is
made from Lights On to Lights Off or Lights Off. After the
transition time, typically 10 minutes, the Temperature Reset
Run PID parameters are used. Press the DOWN key for the
Run parameters, see Figure 60. Pressing the DOWN key
again will display setpoint reset limits as shown in
Figure 61.
Figure 59
Figure 60
Figure 61
Desert Aire - CM3550 Manual