TB-3072
Page 3 of 6
© 2018 DESCO INDUSTRIES INC
Employee Owned
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website:
Desco.com
Features and Components
A. Power Jack:
Connect the included 24VDC power
adapter here.
B. Operator LEDs:
Illuminates green when the
operator is properly grounded. Illuminates solid red and
audible alarm sounds when the operator is not properly
grounded.
C. Worksurface LEDs:
Illuminates green when the
worksurface is properly grounded. Illuminates red and
audible alarm sounds when the worksurface is not
properly grounded.
D. Park Snap:
Allows the operator to disconnect (and
park) a wrist strap when leaving the workstation, without
creating a false alarm. Touch the park snap and the
monitor's audible alarm will disable for approximately 10
seconds. Use this time to disconnect the wrist cord from
the wristband, and attach it to the park snap or remove
the banana plug from the jack. Upon returning to the
workstation and disconnecting the wrist cord from the
park snap, the operator has approximately 10 seconds
to reconnect the wrist cord to a worn wristband before
activating the alarm.
E. Monitored Operator Jack:
Insert the single-wire
wrist cord here to monitor the operator's connection to
ground.
F. Threaded 10mm Ground Snap:
Connects the
worksurface mat to electrical ground.
G. Threaded 10mm Worksurface Monitor Snap:
Verifies that the worksurface's path-to-ground is <500
megohms.
A
D
B
C
E
F
G
Figure 4. Mini Monitor features and components
