Desam DMD2 Series Page 5 Use Manual Download

Page: 5 / 43

4 / 43

1. Product overview

1.1 Function introduction

The equipment support analog channel 16 and 1 USB extended recording channels, high-quality 21 pre amplification

circuit, DSP processing bus structure, built in function of feedback canceller, noise canceller, the echo canceller etc.,

reducing quality sound, is mainly used in various kinds of large sites, can satisfy the application requirements of theatre,

music hall, remote video conferencing, gymnasium, Chapel, conference centers, theme parks and other public sound

reinforcement system etc.. The operation is simple, intelligent control:

1. 24bit/48KHz sampling frequency, high performance A/D D/A converter and 32-bit floating point DSP

processor, full function matrix Remix features a clear voice for the user to provide superior.

2. Adjust the input sensitivity of 2, high precision, a total of 21 stalls, step 3dB, the maximum input gain 60dB.

3. efficient processing algorithm: AFC, AEC, ANS, AUTOMIXER, EQ, GATE, AGC etc..

4. rich interface extension: GPIO supports 8 channels can be custom input output GPIO, level support external

input 3.3~24V; USB interface supports recording, the scene preservation etc.; RS-485 support automatic camera

tracking function, easy realization of video conference; RS-232 bidirectional serial control interface: control or

receiving control equipment, such as video matrix, camera etc..

5. support the functions of presupposition of multi group scene, humanized operation interface software.

6. fast operation: web control mode, support Android, IOS system.

7. 1 group of USB record-play channel.

8. The IOS application has been launched .

Summary of Contents for DMD2 Series












































Search results

Summary of Contents for DMD2 Series

Reviews:

Related manuals for DMD2 Series

Brands by name

Popular brands

Desam DMD2 Series, Use Manual

Search results

Summary of Contents for DMD2 Series

Reviews:

Related manuals for DMD2 Series

Brands by name

Popular brands