![background image](http://html1.mh-extra.com/html/desa/vvf36/vvf36_owners-operation-and-installation-manual_2486194007.webp)
www.desatech.com
56131H
7
0"
36"
2"
Wall In Front Of Glass
36" Min.
Perpendicular
Wall 2" Min.
From Opening
Right Side
Surround
(0" Min.)
Left Side
Surround
(0" Min.)
TOP VIEW
Figure 6 - Mantel Clearances for
Peninsula and See-Thru Fireplaces
(Peninsula Shown)
21" Min.
15" Min.
12" Min.
4"
Min.
7" Min.
1
1
/
2
" Max.
UNIT
Spacer
.x.4
Combustible.
Material.May.
Be.Used
Drywall.(Gypsum.
Board, Sheetrock, etc.)
Safe.Zone.for.
Projection.of.
Combustible.
Material
Woodwork, such as wood trims, mantels and
other. combustible. materials. should. not. be.
placed within 7" of the opening of fireplace
(see.Figure.6).
Combustible.material.above.projecting.more.
than. 1.
1
/
". from. appliance’s. front. face. must.
not. be. placed. less. than. 15". from. opening.
of appliance, (ref.
NFPA Standard 211 Sec.
7-3.3.3
)
PRE-INSTALLATION PREPARATION
Continued
Figure 5 - Minimum Clearances
(See-Thru Shown)
Combustible.Material
Drywall
.x.4.
Stud
Minimum.1".Clearance.from.
Side.(Only.for.See-Thru)
FRAMING
Once final location has been determined,
observing clearances for vent termination,
you.may.construct.framing.using.dimensions.
shown.in.Figures.7.thru.13.depending.on.your.
particular.installation.
If.appliance.is.to.be.installed.directly.on.car-
peting, tile (other than ceramic), or any com
-
bustible material other than wood flooring, the
appliance.must.be.installed.upon.a.metal.or.
wood.panel.extending.the.full.width.and.depth.
of. the. appliance.. There. are. three. holes. on.
each.side.of.the.bottom.of.unit.where.screws.
can be used to secure unit to floor.
Figure 7 - Rough Opening for Installing
Peninsula Fireplace
39
3
/
4
" Min.
40
1
/
2
"
23
5
/
8
"
39
3
/
4
"
Min.
40
1
/
2
"
23
5
/
8
"
*
Figure 8 - Rough Opening for Installing
Peninsula Fireplace on Platform
* As required by design as long as
ceiling.clearance.is.maintained.
Platform.
Must.Be.
Solid, Flat,
and.Fully.
Supported