www.desatech.com
116235-01K
30
CLEANING AND MAINTENANCE
WARNING: Only parts supplied
by the manufacturer should be used
when replacing broken or damaged
glass door panel (see
Replacement
Parts
, page 34). This glass door
panel is a complete unit. No substi
-
tute materials may be used.
CAUTION: Wear gloves and
safety glasses while handling or
removing broken glass. Do not re
-
move if glass is hot. Keep children
and pets away from glass.
If glass has been broken, carefully remove
glass door (see
Removing/Replacing Glass
Door
, page 24). Vacuum all glass pieces with
a shop vac.
CAUTION: Do not vacuum if
pieces are hot.
Use only the tempered glass door replace
-
ment intended for this fireplace (see
Replace-
ment Parts
, page 34 for detail on ordering).
No substitutions may be made. See
Remov-
ing/Replacing Glass Door
, page 24 for instruc
-
tions for replacing glass door.
WARNING: Do not operate fire
-
place with the glass door unlatched,
removed, cracked or broken.
pILOT AND BURNERS
• Remove ember material before cleaning
burners and replace when cleaning is
complete.
• Burner and controls should be cleaned
with compressed air to remove dust, dirt
or lint.
• Use a vacuum cleaner or small, soft bristled
brush to remove excess dust, dirt or lint.
LOGS
• If you remove logs for cleaning, refer to
Installing Lava Rock and Glowing Embers
,
page 25, to properly replace logs.
• Use a vacuum cleaner to remove any
carbon buildup on logs.
• Replace log(s) if broken. See
Replacement
Parts
on page 34.
•
Replace ember material periodically as
needed. See
Replacement Parts
on page 34.
WARNING: Turn off fireplace
and let cool before cleaning.
CAUTION: You must keep
control areas, burners and
circulating air passageways of
fireplace clean. Inspect these
areas of fireplace before each
use. Have fireplace inspected
yearly by a qualified service
person. Fireplace may need
more frequent cleaning due to
excessive lint from carpeting,
bedding material, pet hair, etc.
GLASS DOOR
WARNING: Handle glass
door panel with care. Do not
strike, slam or otherwise abuse
glass. Do not operate fireplace
with the glass door unlatched,
removed, cracked or broken.
WARNING: Do not use
abrasive cleaners as this may
damage glass. Use a nonabra
-
sive household glass cleaner to
clean glass. Do not clean glass
when hot.
Glass must be cleaned periodically. During
start-up it is normal for condensation to form
on the inside of the glass causing lint, dust and
other airborne particles to cling to the glass
surface. During initial start-up a slight film may
form on the glass due to paint curing. The
glass should be cleaned several times with a
non-ammonia, nonabrasive household clean
-
er and warm water after the first two weeks
of operation. Thereafter, clean the glass two
or three times during each heating season,
depending on the usage and circumstances
present. Refer to
Removing/Replacing Glass
Door
, page 24 of this manual when removing
glass door for cleaning.
