www.desatech.com
116710-01C
tHERmoStAt SERIES
(moDELS HRc200 AnD HRc201)
The hand-held remote can be operated using
either the manual mode (MAnU) or thermostatic
mode (AUTo) (see figure 7). To select fahren-
heit/Centigrade mode display, carefully press the
˚C/˚F mode button with the end of a paper clip or
similar blunt object.
manual mode
1. Press the PoWER and LoCK buttons together
to turn on the hand-held remote control.
2. Press the MANU button to turn on the fire
-
place.
3. Press the PoWER and LoCK buttons together
to turn off the fireplace.
Auto (thermostatic) mode
1. Press the PoWER and LoCK buttons together
to turn on the hand-held remote control.
2. Press AUTo button to select this mode.
3. Set the desired room temperature by press
-
ing the TEMP + or - buttons.
4. Press the PoWER and LoCK buttons together
to turn off the fireplace.
Note:
Do not leave the hand-held remote in the
AUTO mode close to the fireplace. The radiant
heat from the fireplace will turn off the fireplace.
Ideally, place the hand-held remote in the center
of the room facing towards the fireplace.
Note:
Do not hold the hand-held remote for a long
time. Body temperature will affect its operation in
the AUTo mode.
Figure 7 - Thermostat Hand-Held Remote Control Unit
LOCK
MANU
AUTO
ºC/ºF
TEMP
POWER
ROOM
TEMP
SET
TEMP
AUTO
Turns Hand-Held Remote
On or Off and Allows You
to Choose the Manual
Setting
Selects AUTO Mode
°C/°F Mode Button
Locks System to
Prevent Accidental
Ignition
Turns Burners
On or Off
Increases or Decreases
Room Temperature in
AUTO Mode
Digital Display Shows
Temperature and Settings
Safety Features
When away from home for an extended period
of time or as a child safety feature to prevent
accidental ignition of the fireplace, the receiver
on/off/REMoTE switch should be in the off
position.
Auto Shutoff Feature
1. If the average room temperature reaches a
range of 82° F (28° C) to 92° F (33° C), the
hand-held remote control will perform a safety
override and shut the fireplace off. This feature
is not available in the MAnU mode.
2. The receiver continuously receives signals
from the hand-held remote to control the
room temperature. If the hand-held remote is
misplaced, obstructed or for any reason can
-
not transmit to the receiver, the receiver will
shut off the fireplace. This will occur in eight
or more minutes depending upon location of
remote transmitter and strength of batteries.
Key Pad Lock Feature
This feature allows the user to lock/unlock the
keypad on the hand-held remote in the MANU or
AUTo mode to prevent inadvertent operation (i.e.
children operating the hand-held remote control,
etc.). The keypad is locked in either on or off. Press
the PoWER and LoCK buttons together to turn
the unit on or off.
