![background image](http://html1.mh-extra.com/html/desa/hgc23ton/hgc23ton_owners-manual_2486365015.webp)
www.desatech.com
121623-01A
15
Equipment
Shutoff.Valve
Gas.
Meter
Figure 13 - Checking Gas Joints (Natural
Gas Only)
Gas.Regulator
INSTALLATION
Continued
PRESSURE TESTING FIREPLACE GAS
CONNECTIONS
1. Open equipment shutoff valve (see Figure
11, page 14).
2.. Open.main.gas.valve.located.on.or.near.
gas. meter. for. natural. gas. or. open. pro-
pane/LP.supply.tank.valve.
3. Make sure control knob of fireplace is in
the.OFF.position.
4. Check all joints from equipment shutoff
valve to gas regulator (see Figure 12,
page.14.or.Figure.13)..Apply.noncorrosive.
leak detection fluid to all joints. Bubbles
forming.show.a.leak.
5.. Correct.all.leaks.at.once.
6. Light fireplace (see
Operation
, page 16).
Check.all.other.internal.joints.for.leaks.
7. Turn off fireplace (see
To Turn Off Gas to
Appliance
, page 17.
Log
Shoulder.Screw
Screen
Figure 14 - Installing Log and Screen
(Mantel Not Shown)
INSTALLING LOG SET AND SCREEN
1.. Remove.log.packaging.material.and.discard.
packaging..Gently.place.log.over.the.burner.
(see.Figure.14)..Do.not.allow.log.to.contact.
flame. If flame contacts log, soot will be
created.
2.. Reattach.screen.by.placing.the.notches.
in. the. screen. frame. over. the. shoulder.
screws.and.pushing.down.