![background image](http://html1.mh-extra.com/html/desa/hgc23ton/hgc23ton_owners-manual_2486365019.webp)
www.desatech.com
121623-01A
19
5.. Blow.air.into.the.primary.air.holes.on.the.
injector.holder.
6.. In.case.any.large.clumps.of.dust.have.now.
been.pushed.into.the.burner.repeat.steps.
3.and.4.
Clean.the.pilot.assembly.also..Additional.clean-
ing.may.be.needed.for.proper.pilot.operation.
based.on.use/lack.of.use..A.yellow.tip.on.the.
pilot flame may indicate dust and dirt in the pilot
assembly..There.is.a.small.pilot.air.inlet.hole.
about 2" from where the pilot flame comes out
of the pilot assembly (see Figures 23 or 24,
depending on model). With the unit off, lightly
blow. air. through. the. air. inlet. hole.. You. may.
blow.through.a.drinking.straw.if.compressed.
air.is.not.available.
Figure 23 - Pilot Inlet Air Hole
(Propane/LP Gas)
Pilot.Assembly
Pilot.Air.
Inlet.Hole
Pilot.Assembly
Pilot.Air.
Inlet.Hole
Figure 24 - Pilot Inlet Air Hole
(Natural Gas)
cLEANING
Continued
TROUBLESHOOTING
WARNING: Turn off and unplug fireplace and let cool before
servicing. Only a qualified service person should service and repair
fireplace.
CAUTION: Never use a wire, needle or similar object to clean
ODS/pilot. This can damage ODS/pilot unit.
Note: All troubleshooting items are listed in order of operation.
POSSIbLE CAUSE
1..Ignitor.electrode.not.con-
nected.to.ignitor.cable
2..Ignitor. cable. pinched. or.
wet
3..Broken.ignitor.cable
4..Bad.ignitor
5..Ignitor. electrode. posi-
tioned.wrong
6..Ignitor.electrode.broken
REMEDY
1..Reconnect.ignitor.cable
2..Free.ignitor.cable.if.pinched.
by. any. metal. or. tubing..
Keep.ignitor.cable.dry
3..Replace.ignitor.cable
4..Replace.ignitor.
5..Replace.pilot.assembly
6..Replace.pilot.assembly
ObSERVED PRObLEM
When ignitor button is pressed,
there.is.no.spark.at.ODS/pilot
LOG SET
•. If.you.remove.one-piece.log.set.for.clean-
ing, refer to
Installing Log Set and Screen
,
page 15, for placement instructions.
•. Replace.log.set.if.broken.or.chipped.(dime-
sized or larger).
CABINET
Air Passageways
Use pressurized air to clean.
Exterior
Use.a.soft.cloth.dampened.with.a.mild.soap.
and.water.mixture..Wipe.the.cabinet.to.remove.
dust.