108122-01D
For more information, visit www.desatech.com
For more information, visit www.desatech.com
2
Header
Left Front
Side
Screw
Right Front
Side
Screw
Top
Shipping
Carton
WARNING ICON
G 001
WARNING: Carefully remove each mantel piece
one at a time from shipping carton. Do not try to lift all
of the parts out of the box at once. This may damage
mantel pieces.
UNPACKING MANTEL
1.
Carefully remove packaging materials, header, right front, and
left front one at a time from shipping carton.
2.
Remove 2 screws attaching left side to right side (see Figure
1). Remove one side from shipping carton. Discard screws.
Remove 2 screws attaching other side to top. Discard screws.
Remove other side from shipping carton.
3.
Remove top from shipping carton.
Figure 1 - Removing Mantel Pieces from Shipping Carton
ASSEMBLING MANTEL
1.
If you must install mantel flush with wall, baseboard will
prevent proper installation of mantel. Either alter baseboard to
fit mantel or remove baseboard.
2.
Insert male twistlock fasteners (located on right side) in female
twistlock fasteners (located on right front) (see Figure 2).
Tighten screws of twistlock fasteners one-half turn with flat
head screwdriver. Repeat for left side. This will lock the
fasteners together.
3.
Rest header on face boards of right and left sides (see Figure 3).
Push sides together to eliminate gaps with header. Push down on
header to ensure a tight fit (see Figure 4). Attach header to right
side with two 1
1
/
4
" screws. Repeat for other side (see Figure 4).
Figure 2 - Attaching Mantel Right Front to Mantel Right Side
Figure 3 - Installing Header
Header
Left
Side
Figure 4 - Attaching Header
Side
Face Boards
Right
Side
Header
Mounting
Block
Side
1
1
/
4
"
Wood
Screws
Right Side
Right Front
Male
Twistlock
Fastener
Female
Twistlock
Fastener
Screw
