![background image](http://html1.mh-extra.com/html/desa/cfgf28pta/cfgf28pta_owners-operation-and-installation-manual_2486279005.webp)
5
102667
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local
codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also
known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
1. Place the carton containing the fireplace unit on its back. Hold fireplace and
pull the carton and pallet away. Remove trim kit from front of fireplace.
2. Locate two screws above top corners of the fireplace screen. Remove and
discard these screws. Lift fireplace screen up and pull out to remove.
3. Remove protective packaging applied to logs, log base assembly, and fireplace.
4. Check all items for any shipping damage. If damaged, promptly inform dealer
where you bought fireplace.
PRODUCT
FEATURES
Operation
This vent-free fireplace is clean burning. It requires no outside venting. There is no
heat loss out a vent or up a chimney. Heat is generated by both realistic flames and
glowing embers. When used without the blower, the fireplace requires no electricity
making it ideal for emergency back-up heat.
Safety Device
This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System
(ODS). The ODS/pilot is a required feature for vent-free room heaters. The ODS
system shuts off the fireplace if there is not enough fresh air.
Piezo Ignition System
This fireplace has a piezo ignitor. This system requires no matches, batteries, or
other sources to light fireplace.
Blower Assembly
This fireplace has a blower assembly. The blower operates thermostatically or
manually. The blower circulates heated air from the fireplace into the room. Use of
blower is optional.
Thermostat Control Models (VGF28PTA/CFGF28PTA)
These fireplaces have a thermostat sensing bulb and a control valve. The thermo-
stat controls the heat output and flame height. This maintains a consistent room
temperature. Even the lowest setting provides realistic flames and glowing embers
from two burners. Selecting higher comfort settings allows fireplace to run longer,
producing greater heat output. At lower comfort settings, the fireplace will run
less. This results in increased heating comfort. This can also result in lower
gas bills.
Variable Manual Control (VGF28PV/CFGF28PV)
These fireplaces have a variable manual control valve which allows the user to
choose the heat setting that best suits his needs. Any setting between low and high
may be selected by simply turning the control knob.