manualshive.com logo in svg

Desa BI 1000, Technical Information, Assembling Instructions, Use And Maintenance

Share
Download
Desa BI 1000 Technical Information, Assembling Instructions, Use And Maintenance Download Page 11

11 

HANDLING AND TRANSPORTATION 

 
Moving the equipment must be carried out by properly equipped personnel with equipment which is suitable for the 
weight of the heater. If a fork lift is used, the equipment should be taken up at the bottom using the guides in the 
supporting base. If a crane is employed use the eye-bolts at the top of the heat exchanger to lift the equipment.  
 

Type 1

10 

 

 

 

Type 11

15 

 

 
 

        WARNING! 

 

Handling and transportation must be carried out with the greatest care to avoid damage the equipment and putting 
people in danger. 
 
It is forbidden for people to stand close to the equipment during handling and transportation manoeuvres. 
 
It is forbidden to stack more pieces of equipment than the indication on the packaging itself and the greatest care must 
be taken in aligning the packages so that they are stable. 
 
If the equipment must be moved by hand, ensure that sufficient human strength is available for the task in relation to the 
weights indicated in the paragraph “TECHNICAL DATA” and to where and how far the equipment has to be moved.  
 
The use of protective gloves is advisable. 
 

 

All Parts available from 

www.sparesgiant.com 

01772 329 565

Summary of Contents for BI 1000







































Reviews:

No comments

Brands by name

Popular brands

Load more brands