Diamond Shield Crystal
Instruction Manual
Page 16
Operating options
Pressing the start button will stop the execution. Pressing the
start button again allows the execution to proceed from the
point of interruption.
Intensity is set by using the arrow keys to move up and down
(
"+"
- keys and "–").
Pressing the
EXIT
button will quit the current application.
Continuing an interrupted sequence
If the execution of a sequence has been interrupted for some reason,
you can continue by pressing the "Memory" button. This applies even
if the sequence was interrupted because the battery has become
empty during program execution. Obviously, the correct chip card
must be inserted, if the interrupted sequence was stored on a chip
card.