Derksen GoboTop+, Operating Instructions Manual

Page: 20 / 28

5. Insert the replacement lamp.
6. Hand-screw the fixing ring.
7. Insert the projection head with the lamp carefully into the socket until the lamp locks
noticeably into the clamp. Do not push as far as it will go.
Safety Precautions
Safe placement and operating conditions
- GoboTopPlus is only suitable for dry indoor locations.
- Observe a minimum distance of 0.5 m between the projection head and any flammable
materials and surfaces.
- Projection head, lamp, socket and swivel arm heat up during operation and may reach more
than 100
°
C. Wait approx. 15 minutes until the system has cooled down before you handle
gobo, lamp, swivel arm or projection head.
- Use only replacement lamps that are tested and approved by Derksen Lichttechnik. If you
operate GoboTopPlus with an unsuitable lamp, the system will be damaged.
- Do not cover the rear side of the lamp in order to avoid accumulation of heat.
18