Derksen GoboTop+, Operating Instructions Manual

Page: 19 / 28

Replacing the lamp
Avoid touching the hot projection head, lamp, socket and swivel arm when the system
is in operation. Switch it off and let it cool down for at least 15 minutes before you handle
accessories, gobo or lamp.
Use only replacement lamps that are tested and approved by Derksen Lichttechnik.
If you operate GoboTopPlus with an unsuitable lamp, the system will be damaged.
Tested and approved lamps:
- PHILIPS Brillant Line Pro
12 V, 35 / 50 W 24
°
- BLV Eurostar 12 V, 35 / 50 W 24
°
- OSRAM Dekostar Titan 12 V, 35 / 50 W 24
°
- Sylvania Superia 12 V, 35 / 50 W 24
°
Please note that the angle of the reflected beam must be 24
°
!
Replacing the lamp:
1. Unplug the system or switch it off.
2. Pull the projection head with the lamp carefully out of the socket.
3. Remove the fixing ring from the housing by turning it in the direction of the arrow “open”.
4. Take out the multi-mirror lamp (see fig. page 15).
17