Shenzhen Dericam Technology Co., Ltd. User Manual V1.0.7
Email:
Website:
www.dericam.com
26
4.4.3 Alert Settings
After enable
“Motion Detection” in Alarm Setting, please continuously set up in “Camera Setup” ->
“Alert Settings”.
- Enable/Disable
“Push Notification” to send/not send alarm notifications by the Dericam App if
any motion is detected. You should allow Dericam App to push notifications in
“Settings” ->
“Notification Management” on your mobile device, and keep the App running on the
background.
- Enable/Disable
“Record video to SD Card” to save/not save the video recordings about motion
detection to the SD card of the camera.
- Enable/Disable
“Alarm emails with snapshot” to send/not send alarm messages with up to 3
snapshot by email. It is required to make further email settings which will be described in the
section 4.4.10.
- Enable/Disable
“Save snapshot/recording to FTP server” to save/not save snapshot/video
recordings to the FTP server if a FTP server has been built on computer.
- You can set up sending up to 3 snapshots with email message for each motion detection event
in
“Snapshot per alarm”.
4.4.4 Scheduled Recording Settings
Go to
“Camera Setup” -> “Scheduled Recording Settings” to enable/disable automatic and
constant recording. The video length of each recording can be set up, and you can also set up the
date & time schedule of a week for carrying out recording. The scheduled recordings will be saved
in the SD card of camera as default.
