- 2 -
Electrical Symbol
Risk of Danger. Important information.
See Manual.
AC/DC power adaptor input polarity
Current battery capacity indicator
Warning
Ɣ
Discharge test device before measuring
.
Ɣ
Do not open the case of meter during measurement.
Ɣ
After measurement, power off the meter. As there will be
slight power consumption under auto power off mode.
Ɣ
Take the batteries out of the meter if it will be left idle for a
long time.
Ɣ
Do not use organic solvent to clean the meter. Wipe it with
a soft cloth, if necessary.
Ɣ
means battery capacity is full. Once
is
displayed which indicates power is low for operation and
please replace battery immediately to secure the accuracy
in specification.
- 3 -
I. Introduction
This LCR Meter is a 19999/ 9999 counts dual display, high
accuracy LCR meter, which could measure Inductance/
Capacitance/ Resistance with secondary parameters including
dissipation factor (D), quality factor (Q), phase angle (
ș
),
equivalent series/ parallel resistance (ESR or Rp).
This LCR Meter is fully auto ranging operation for AC
impedance & DC resistance measurement. The user could
measure the L/C/R components directly in “AUTO-LCR
“ smart mode without selecting the function key.
Components could be measured in series or parallel mode
according to the DUT (device under test) impedance
automatically.
User could select the desired test frequencies of
100Hz/120Hz/1kHz/10kHz /100kHz.
The “SORTING ” mode could help the user to make a quick
sort for a bunch of components.
The LCD display with the backlight for easy reading in dark
places.
With a 9V battery operation is standard for the meter, but a DC
9V adaptor can also be used as an optional power input.
The test data can be transferred to PC through an optional full
isolated optical USB-IR interface.