Edition:03/21_public
16
Manual Storage Heater
System Start-up
Note: All breakers must be off for the heater to be safely de-energized to permit safe
servicing.
Steps to activate the system
1.
Control Panel
- Energize control panel at the circuit breaker.
2.
Fans and Thermostats
- Check proper operation of fans and thermostats. Check to see
that the fans go ON and OFF with operation of the thermostat.
3.
Circuit Breakers
- Switch "ON" all element feed circuit breakers.
4.
First Charge
- The heater insulation is free from organic binding material. It can thus be
operated immediately without having to go on full charge in order to purge any odours. It
is, however, advisable, to ventilate the room well during the initial charging phase.
5.
Current Draw
- It is wise to check the current draw of each heater. See the Technical
Data Sheet for the proper amperage. This can be done at the breaker panel or at the
individual heaters.