Page 41 of 47
5.4
Replacing the HEPA filter (if provided)
Proceed as follows to replace the filter:
-
Switch the vacuum off
-
Disconnect the vacuum cleaner from the power socket
-
Unlock the HEPA filter from both sides of the vacuum’s head
-
Remove the vacuum’s head
-
Remove the HEPA filter and lay it, overturned, on a work bench. Then unscrew the filter’s
fastening screw
remove the filter, put it in a plastic bag, seal it and
dispose it of according
to the applicable legislation on
the type of material collected.
To reassemble the HEPA filter
, operate in reverse order:
-
Fit the new filter and screw it onto the holding cage by means of the screw previously removed.
Make sure it is correctly fixed.
-
Reposition the HEPA filter on the filter chamber and lock it with the appropriate locking hooks
-
Position the vacuum cleaner’s head above the HEPA filter, then lock it with the appropriate
locking hooks
-
Connect the vacuum cleaner to the mains
-
Switch the vacuum cleaner on by positioning the main switch to
"I",
then check to make sure it
works properly.
EXCLUSIVELY USE FILTERS MANUFACTURED BY DEPURECO