Page 32 of 47
4.7
Replacing parts of the Longopac® sac (if provided)
Depending on the type and quantity of material being vacuumed, it is necessary to periodically check
the sac to avoid filling it excessively.
Proceed as follows to replace the portions of used sac:
-
Switch the machine off
-
Block the vacuum cleaner using the lever on the swivelling wheel
-
Close the upper part of the sac with a clamp (provided with the kit)
-
Separate the sac portions by cutting between the two clamps
-
Remove the portion of the sac containing the vacuumed material, then pull the sac until it reaches the
plate at the bottom of the vacuum cleaner to have another sac, ready for use.
-
Resume with the machine’s usual operations
Pay attention to the graphical references on the sac, they indicate the remaining length of the sac.
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
Warning!
If the sac weighs more than 15 Kg, at least two people are needed to empty it.
Waste disposal must take place in accordance with the laws in force in the country
of use of the vacuum cleaner - for Italy Legislative Decree 152/2006 and amendments