Page 40 of 47
To reassemble the filter
, operate in reverse order:
-
Insert the new filter in the support ring and lock it by means of the fastening clip (
H
)
-
lock the filter to the cage by tying the special laces on the bottom side
-
insert the filter with ring and cage inside the filtering chamber paying particular attention to the
alignment of the cage with the filter shaker’s handle
-
Insert the lever’s end into the appropriate seat on the bottom of the cag, then insert
the fastening clip
-
Place the HEPA Filter (if provided) on top of the filter
-
Insert and block the bin or the Longopac® sac
-
lock the cap with the dedicated locking hooks (
C
)
-
Connect the vacuum cleaner to the mains
-
Turn the vacuum cleaner on, immediately assessing its efficient operation