5.3 Replacing the filter
To replace the filter, proceed as follows:
- Switch off the vacuum cleaner
- Disconnect the vacuum cleaner from the power supply
- Remove the container
- With the help of suitable equipment, remove the inerting filter kit to replace it
- Remove the bag filter from the basket to clean / wash it (or replace it if necessary)
- Unlock the two closing hooks of the head base on the filter chamber (C) from both sides
Warning!
Wear appropriate PPE (dust mask, latex gloves, goggles, etc.).
Summary of Contents for A1086
Page 35: ... Remove the head with its base ...
Page 40: ......
