Should maintenance operations or repairs be carried out, all contaminated objects must
be adequately cleaned, placed in waterproof bags and disposed of in compliance with
the regulations in force.
5.2 General safety regulations
Warning!
All the operations described above must be carried out with the plug
disconnected from the socket.
Before starting any maintenance or cleaning operation, wear suitable
PPE (protective clothing, goggles and/or gloves, etc.) according to
the work to be done.
Place a sign on the vacuum with the message:
“MACHINE UNDER MAINTENANCE
DO NOT START”
Before returning to use, the whole system must be checked
according starting procedures.
Run a few trials operating cycles after every maintenance operation
to ensure proper machine operation.
Failure to observe these precautions can cause serious injury to
personnel.
Maintenance operations must be carried out by trained technicians specialised in the
following sectors:
• Mechanical maintenance
• Electrical maintenance
It is the Safety Manager's duty to ensure the professionalism and skills of these
technicians.
Before starting any maintenance operation, the Safety Manager must
:
- Keep unauthorised personnel out of the work area.
-
Ensure that the necessary tools are in good conditions and readily available to
the maintenance technician.
-
Ensure the maintenance technician is equipped with the personal protection
equipment required for the specific operation (gloves, goggles, shoes, mask, etc.)
-
Make sure the maintenance technician has carefully read the instructions
contained in this manual and has perfectly acquired knowledge on the operation
of the vacuum and its components.
Summary of Contents for A1086
Page 35: ... Remove the head with its base ...
Page 40: ......