Deprag 347F-228, Operating Instructions Manual

Page: 28 / 36

28
10 Accessories – Optional Equipment
N
AME
P
ART
N
O
.
Spring sleeve cpl. 364672 A
Support ring 389775 A
Operating Screwdriver with a Finder:
Installation of the Finder (optional equipment):
•
Remove screw-cap (left-hand thread) from spring sleeve
•
Insert finder and spring into spring sleeve
•
Re-attach screw-cap onto spring sleeve (left-hand thread) and attach
complete spring sleeve package to Screwdriver
Assembly of Support Ring 389775 A
For better driver support and to allow an increased down-pressure force, the
support ring 389775 A may be installed as follows:
1. Disconnect Screwdriver from air supply.
2. Unscrew complete clutch bearing (left-hand thread).
3. Remove the O-rings 802480 and 828074.
4. Slide the support ring over the clutch bearing according to illustration and
install the o-ring 828074 into the appropriate recess.
5. Tighten the complete clutch bearing with support ring 389775 A to the
Screwdriver.
Please check, if screwdriver starts running when connected
directly to the air supply.