Screen
traversed
under PC mode
Maybe the phase is not appropriate. Enter into the PC
setting and change to correct level.
IX. Notes
(1) Please read these operating instructions carefully before you operate
this unit.
(2) When you want to cut off the electricity supply of the whole unit’s power,
please press the
POWER
button on the unit. And take out the plug from
wall outlet.
(3) Don’t press any button if you are not using the unit. Set the
POWER
button to “OFF”, and take out the battery from remote control before
long time non usage.
(4) Be cautious of the safe mark .
(5) Repairs are to be referred to qualified service personnel. Don’t take
apart it by yourself.
(6) Because of a sudden change in temperature or humidity, or when warm
air comes into contact with any cold parts in the unit, condensation may
form. When condensation forms inside, the unit may not function well.
Once condensation disappears, the unit will return to normal
functioning. Placing the unit in a warm room will help to dry up
condensation. This should take 1 to 2 hours, depending on
environmental conditions. As condensation may also appear on the
disc, it should be wiped from inside towards the outer side using a dry
cloth.
(7) It is dangerous to use warped or broken discs since lasers rotate at
high speed. Never use discs repaired with plastic tape or glue, as it will
lead to damage. After playing, if you hear strange noise or the unit
flatters, e.g. the disc does not turn smoothly, please stop playing
immediately.
(8) Please remove the discs after use and put them into cases and store
them in vertical position. Tilting or piling may lead to warping.
Please keep the discs away from direct sunlight, high temperature
and humidity.
40
