background image

8

Intended Use

The Electric scooter is neither a means of transport nor sports equipment, but a device for personal
entertainment. The Electric scooter for domestic use only and only by a person aged at least 14 with a
maximum weight of 100 kg. The other parameters for the permissible operation of the Electric scooter are
defined in the section (“10. List of parameters”) . Importantly, the Electric scooter may only be operated in
good visibility conditions and only if the physical conditions for stability on the Electric scooter are met (for
example, not on one leg/not under the influence of drugs or alcohol). When operating the electric scooter,
the operator must wear personal protective equipment specified in the section (“13. Warnings” > 13.2
Preparation”).

Safety Instruction

We recommend always wearing helmet and protective gear like elbow, knee and wrist protectors to ensure
your personal safety.

Also make sure you have read the user manual carefully, to ensure you know how to ride it in a safe and
fun way.

The Electric scooter is for domestic use only.

It is your responsibility to be aware of and comply with all regulations. If there are no regulations for this
Electric scooter in your country, please take care of your own safety and the safety of others.

Also pay attention to other people. Always ride safely and only at a speed that allows you to brake safely
at any time. A common thing for such products is that there is a risk that you may fall off the product
and injure yourself. Always ride as safely as possible.

If lending the electric scooter to friends and family, please make sure they use proper protective gear
and know how to ride it.

Before riding the electric scooter, please check that all parts are working as supposed to. If any loose
parts, abnormal noise, reduced battery life etc. are detected, please contact your retailer for product
service and warranty. Do not repair the electric scooter yourself.

Inspect the rear tire, rear brake, and brake pad according to Section 7 of the maintenance specification
in this operating instructions. The electric scooter may become unstable if the rear brake is deformed or
loose. This is because the distance between the brake pad and the rear wheel becomes too small,
possibly leading to a blocked rear wheel.

Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender to
loosen or damage the spring holding the fender.

Summary of Contents for SEL-80130
























Reviews: