background image

16

11 Electric scooter safe parking

Once you have stopped the Electric scooter, get off it and press the side stand down with your right foot
to support the Electric scooter. The side stand is located on the left-hand side of the Electric scooter
below the foot board.

Before you ride again, push the side stand back up so that it is parallel to the foot board.

12 Safe transportation

Pack the Electric scooter flat, don

t drop the Electric scooter during the transportation, don

t to put

the Electric scooter near fire or explosive materials.

13 Warnings

13.1

Risks of riding

WARNING

First, learn safe riding before you ride the Electric scooter fast.

-

Failure to observe, loss of control, falls, and violations of the rules can cause injuries.

-

Speed and range depend on the rider's weight, terrain, temperature, and riding style.

-

Wear a helmet and protective clothing when riding the Electric scooter.

-

Read the operating instructions carefully before riding the Electric scooter.

-

For use only in a dry environment.

-

The Electric scooter may not be used on public roads.

-

Make sure that this product complies with local regulations.

-

For domestic use only

13.2

Preparation

-

First, charge the battery completely.

-

Wear a helmet, knee and elbow pads, as well as earmuffs/earplugs.

-

Do not wear loose clothing or open laces that can get caught in the Electric scooter wheels.

13.3

Weight restriction

Reason for the weight restriction:

Ensuring the rider's safety;

Avoiding damage due to overload.

Maximum capacity: 100kg.

WARNING

Summary of Contents for SEL-80130
























Reviews: