10
in this operating instructions. The electric scooter may become unstable if the rear brake is deformed or
loose. This is because the distance between the brake pad and the rear wheel becomes too small,
possibly leading to a blocked rear wheel.
Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender
to loosen or damage the spring holding the fender.
As a result, the brake pad constantly touches the wheel and the motor temperature increases due to the
additional resistance. The rear tire can also get loose if the brake is in constant braking position.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will soften
the rubber and it will no longer have the same grip on the road as usual. Do not touch the tire after
braking.
If you hear unusual noises or notice friction when switching on the electric scooter, a bearing may be
damaged. A worn bearing may even be indicated by strong vibration of the handlebar. In this case,
please check maintenance section or contact your retailer since the bearing needs to be replaced and/or
the handlebar checked and adjusted.
Ride the electric scooter only on a dry surface since otherwise the riding safety and braking performance
may be impaired and the motor or bearings may be damaged.
Stop riding when
the battery show "Low Battery” in the display
. The electric scooter then moves only
slowly and does not have the same traction as normal and the electric brake does not work. In this case,
please use the rear brake to stop the electric scooter. Get off the Electric scooter as soon as the speed
allows to do that safely.
A normally working Electric scooter operates safely and quietly. If you hear noises or notice bumpy
operation, please check wheels, bearings, and brakes. Contact your customer service for repair and
maintenance, if necessary.
8
Maintenance
To ensure you get the best possible performance and experience from your electric scooter, it is
important to do regular maintenance for important parts of the product.
●
Battery maintenance
●
Bearings, Screws, Brakes and Wheels
●
Storage and Cleaning
Your electric scooter will require some maintenance so please read and familiarize yourself with this
guide.
●
Battery maintenance
All batteries have a life cycle, and performance will decrease over time, however here are some
advice to maximize the life span of the battery.
Make sure that the battery is charged at regular intervals, even if you do not use the electric scooter for
a long time. This is to prevent damage to the battery, caused by low voltage over an extended period.
Avoid draining the battery completely. It is best to charge while there is still power on it. This will extend
Summary of Contents for SCO-85351 THOR
Page 25: ...25 ...
