Denver SCO-80100, Original Instruction

Page: 8 / 33

Move handle down to fold the e-scooter
Move handle up to unfold the e-scooter
The knob must be set to RIDING when riding for safety issue to prevent unintended folding the e-
scooter.
3.
Handlebar assembly
1) Parts inside the packaging: two handlebars
2) Change display angle: Loosen screw on the handlebar, rotate the axle to make the
handlebar meter screen upwards while the and display screen turn inwards in a horizontal
level. Remember to tighten screws again
3) Before operating the E-scooter, turn
the handlebar grips and carefully check
all the components to make sure that the
steering is correctly installed as
described above, and that all connecting
parts are secure and fully functional.