background image

specific number of track being played. 

2.

 

For interruption while the CD is playing, press the CD PLAY/PAUSE 

BUTTON once. The Play Indicator “

” will blink continuously on the LCD 

DISPLAY. 

3.

 

Though the sound stops, the disc will continue to 

spin. To re-start playing, press the CD PLAY/PAUSE 
BUTTON once again. The music will start from the 

exact position where it was interrupted. 

4.

 

To stop the CD, press the CD STOP BUTTON once 
whether the CD is in Play or Pause mode. The LCD 

DISPLAY will show the total number of tracks of the disc again. 

5.

 

To turn off the unit, press the POWER BUTTON to “OFF” position. 

 

Skip And Search Mode 
1.

 

During play or pause mode, when CD SKIP/SEARCH 

 or CD 

SKIP/SEARCH 

 BUTTON is pressed once, it will go to the next track or 

go back to the beginning of the track. 

2.

 

During play mode, when CD SKIP/SEARCH 

 or CD SKIP/SEARCH 

 

BUTTON is pressed and held, it will search the track with audible high-
speed forward or backward playback. 

 

Repeat Mode 
1.

 

Repeat 1 : 
When the MODE BUTTON is pressed once, the 

Repeat Indicator “

” will be shown on the LCD 

DISPLAY. This single track of music will be 
repeated. 

2.

 

Repeat All: 
When the MODE BUTTON is pressed twice, the 
Repeat All Indicator “

” will be shown on the 

LCD DISPLAY. The whole disc can be played 

continuously. 

3.

 

To cancel the Repeat Function 

Press the MODE BUTTON repeatedly until the 
Repeat Indicator disappears from the LCD DISPLAY. 

 

Random Play Mode 
This feature allows the track on the disc to be played 
in a random order. 

1.

 

During the CD stop mode, press the MODE 
BUTTON three times, the “

” indicator will 

 

English - 5

Summary of Contents for MMP-355














Reviews: