AC OPERATION
Before operating, please check carefully that the voltage indicated on your
set corresponds to the voltage of your local area.
1.
Plug the AC POWER CORD into a standard AC outlet.
2.
Press the POWER BUTTON to start the unit.
POWER/STANDBY LED INDICATOR will light up to indicate unit is
connected to the power source properly.
SPEAKER BOX CONNECTION
Insert the Speaker plug of the SPEAKER BOXES to the SPEAKER TERMINAL
on the rear of the unit.
RADIO OPERATION
1.
Slide the FUNCTION SWITCH to the “RADIO” position, the RADIO
FUNCTIONAL INDICATOR will light up.
2.
Slide the BAND SWITCH to the desired waveband.
3.
Turn the TUNING KNOB to your desired radio station.
4.
Adjust the sound level by pressing the VOLUME CONTROL KNOB Up or
Down.
5.
To turn off the radio, press the POWER BUTTON to “OFF” position.
FM STEREO INDICATOR
When tuned to a FM stereo broadcast the “FM ST” INDICATOR will light up.
If it does not, check that the BAND SWTICH is set to “FM ST” position. In
weak signal areas the FM stereo signal may not be strong enough and can
cause excessive background noise. In this case, slide the BAND SWITCH to
the “FM” position.
ANTENNAS
For best reception, fully extend the FM ANTENNA to receive FM stations. For
AM reception, the unit has a built-in antenna, and it may be necessary to turn
the whole unit for best reception.
BASS BOOST
At all volume levels, push the BASS BOOST BUTTON to “ON” position to
enhance the low frequency sound. To release the super bass, simply push
this button once again.
STEREO HEADPHONE JACK
For private listening, insert the plug of a Stereo Headphone into the STEREO
HEADPHONE JACK and adjust the VOLUME CONTROL KNOB accordingly. Be
English - 2
