screen. It indicates the end of the loop.
C) Looping will run from set point A to set point B until you turn off Repeat.
- Press A-B again to cancel A-B loop mode.
- When playing a DVD disc, you can repeat a specific segment only in one title / chapter.
16.
Through USB read WMA, JPG discs (files)
Player can read WMA, JPEG discs (files) through USB
17.
Volume control (compatible with DVD, CD ETC discs)
You can press the Volume button on the front of TV set or the amplifier to control the sound level.
Pressing the Vol+ button on the remote allow you to amplify the sound level; Pressing Vol- will reduce
the sound level.
Chapter 3 The Setup Menu System
1.
General Steps of Setup Menu
A) Press the Setup button, the main setup menu appears.
When the main menu displayed, the DVD system will auto pause.
B) Press the Left and Right arrow buttons to highlight the icon of the desired page, then press the
Down or Right arrow button to activate that page; for example, if you want to setup the video page,
press Right to highlight the video icon, the video page will be displayed on the screen.
A) Press the Down arrow button to highlight the desired option. Press Enter or press Right to select,
the choices of that option appear on the right. For example, press the Down arrow button to hightlight
the BRIGHTNESS option, then press Enter to select, the brightness choices appear on the right.
B) Press the Arrow buttons to highlight the Exit Setup option, then press Enter or Setup again to exit
Setup Menu.
2.
Setup Items Introduction
A) TV SYSTEM
According to the Colour System of the TV, you can choose the TV System.
a) AUTO: Choose this settings if your DVD player is connected to a multi-system TV.
b) NTSC: Choose this setting if your DVD player is connected to a NTSC TV.
c) PAL: Choose this settings if your DVD player is connected to a PAL TV.
B) SCREEN SAVER
If the screen saver is on, when your DVD player is in Stop, Open, or No Disc state, or there is a frame
frozen for more than 3 minutes, the screen saver will be displayed. This feature can protect the screen
from damage.
a) ON: Choose this setting to activate the screen saver.
b) OFF: Choose this setting to cancel the screen saver. The default setting is ON.
C) VIDEO
TV-RGB: Choose this setting if your DVD player is connected to a TV with an S-Video cable composite
video cables.
a) P-SCAN: Choose this setting if your DVD player is connected to a progressive scan TV with Y, Cb,
Cr video cables.
Notes:
When your DVD player output composite video, you can choose the setting randomly. Choose TV-
RGB / P-SCAN if your DVD player is connected to a progressive scan TV.
D) TV TYPE
a) 16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen TV. If
you choose this setting and you don’t have a wide screen TV, the images on the screen may appear
distorted due to vertical compression.
b) 4 : 3 LB (Letter Box): Choosing this setting if your DVD player is connected to a normal ratio TV,
connector. You’ll see the movies in their original aspect ratio (height-to-with ratio). You’ll see the entire
frame of the movie, but it will take up a smaller portion of the screen vertically. The movie might appear
with black bars at the top and bottom of the screen.
c) 4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal ratio TV.
You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left
and right edges) won’t be seen.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display images in the
aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will
appear on the left and right side of the screen.
You must adjust the screen setting depending on the type of the television you have.
E) PASSWORD
The password option is initialized locked, and you cannot set the ratings limit or change the password.
In order for the Ratings feature work, the password mode must be turned on. If you want to set the
12
