22
Troubleshooting
Device does not turn on:
•
Verify that power cord is plugged into the device and into wall outlet.
•
Unplug device and check fuse. If fuse is blown, replace it. See Directions For
Use: Fuse Replacement Instructions.
EHP does not heat:
•
Ensure that the plugger is fully seated on the handpiece, rotate slightly in
either direction until you feel the plugger ‘click’ into place, then try activating
again. Refer to Fig. 4 on page 9.
•
Remove the EHP and reseat in the handpiece.
•
Check temperature settings.
•
Replace the EHP with a new one.
