8
Directions For Use
Setting Up The Pack
1.
Unpack the console and check that the Voltage Selector is set to the
proper voltage. See Fig. 3.
•
Use the 115V position for 110-120V 60Hz voltages, and the 230V
position for 220-250V 50Hz voltages. Always unplug the unit
before changing fuses or adjusting the voltage selector.
•
To change voltage, use a flat head screwdriver to turn the Voltage
Selector on the back of the console to the proper voltage setting.
•
To change fuse, replace the fuse to match voltage (see
Specifications). Replace with 0.10A, 250 V Slo-Blo
®
fuse (0.05A for
230 V). For replacement, press on the black plastic clip of the fuse
compartment, pull out and replace with the correct fuse.
2.
Remove packaging from handpiece.
Figure 3
Back of Device
Programming Port
(For Manufacturing
Use Only)
Voltage Selector
AC Power Cord Receptacle
Fuse Compartment
Battery Charge LED Indicator
Figure 2
Component & Console
Identification
On/Off Power Switch
Pack Handpiece
Preset Buttons
Thermal Response In Use LED
Tone Level
Increase/Decrease
Pack Activation Indicator
360° Activation Cuff
Temperature
Increase/Decrease
Numerical
LED Display
Electric Heat Plugger
Temperature LED
Tone Level LED
Preset Buttons In Use LEDs
Thermal Response Select
