10 / 71
F.
Sound Adjustment
ProPex
®
II
is equipped with a sonic indicator which enables monitoring of the progression
of the file within the canal.
This function, in conjunction with the display of progression, enables working "blind" while
still monitoring the progression of the file.
The volume can be adjusted to one of four levels: mute, low, normal and high, by
successive presses on the
volume key.
G. Demo
mode
The built-in Demo mode is available to become acquainted with the device and to
demonstrate it’s operation.
1.
Disconnect the measuring cable or the
charger from the device if connected and
turn Off the device
2.
To start Demo Mode, press and hold the
(On/Off) button for about 2 sec. until
the second beep sounds and “Demo” indication appears in the bottom left corner
of the display
3.
During Demo cycle device operating sequence is shown on the screen. Press
button to pause the simulation; press
button again to resume
4.
When Demo cycle is completed, it is repeated automatically until interrupted by
the operator
5.
To exit Demo mode press
button and hold it for about 2 sec. until a beep
sounds
Note: If measurement cable is connected to
ProPex
®
II
during Demo cycle, the
device switches automatically to normal operation mode
