Operating instructions
4 Pre-reprocessing
66 27 587 D3673.201.02.04.02
27
English
4
Pre-reprocessing
4.1
Initial start-up and longer breaks in use
ü
The high-speed handpiece can reach full power only if
specified operating pressures are set [→ 20]. If necessary,
have the pressures checked by a service technician with a star
tester that is placed between the supply hose and the quick
coupling.
➢
Sterilize the high-speed handpiece and accessory parts prior to
startup [→ 46].
NOTE! Never sterilize the quick coupling.
➢
Clean and lubricate the high-speed handpiece after longer
breaks in use.
4.2
Prior to starting the work day
➢
Purge the water and air channels for 30 seconds.
