manualshive.com logo in svg

Dentsply Sirona DAC Universal Touch, Operating Instructions Manual, Page: 63 / 124

Share
Download
Dentsply Sirona DAC Universal Touch Operating Instructions Manual Download Page 63

Dentsply Sirona
Operating Instructions DAC Universal

4 Operation

4.1 Operation of the touch panel

6681006 D3708
D3708.201.01.01.02    04.2019

63

4.1.3.3.3

History: Error messages

03.02.2014

9999

5

29.07.2014

5

4

10.11.2014

11

3

08.05.2015

90

2

10.07.2015

7777

1

04:00 PM

Pressing the "

History: Error messages" function key displays the last 99

error messages.

The display shows the error message number and the date.

Warning messages are not displayed in the history.

Pressing the "

Navigate: Up" or the "Navigate: Down " displays the other

error messages.

4.1.3.3.4

History: Check & Clean

12.03.2019

18

04:00 PM

Pressing the "

History: Check & Clean" function key displays the date of

the last Check & Clean processes (for 50 / 200 cycles).

04:00 PM

A Check & Clean process is deemed complete and an entry appears
under history when the last step of the Check & Clean process was
shown on the screen and a test run has been performed.

Summary of Contents for DAC Universal Touch





























































































































Reviews:

No comments