6 Errors / Display messages
6.5 Display messages and what they mean
Dentsply Sirona
Operating Instructions DAC Universal
116
6681006 D3708
D3708.201.01.01.02 04.2019
6.5
Display messages and what they mean
04:00 PM
1002
The display messages are assigned a code number. The code number
is visible in the upper left-hand corner, next to the error symbol. An
example of this is shown on the left.
In the table below you will find the code numbers for some display
messages together with an explanation and troubleshooting for the
specific displayed message.
IMPORTANT
If the DAC Universal displays a message which you cannot find in the
table below, please contact your dealer authorized by .
Code
no.
Description
Troubleshooting
1002
Cycle discontinued by the user.
If the error occurs unintentionally, please contact your authorized
dealer.
1003
The safety ring was pressed.
If the error occurs unintentionally, please contact your authorized
dealer.
1006
The water tank is not inserted.
Insert the water tank.
Check whether the float is in the water tank.
If the error occurs repeatedly, please contact your authorized
dealer.
1008
Lack of compressed air
Check the compressed air supply.
If the error occurs repeatedly, please contact your authorized
dealer.
1009
The device was switched off and
on too quickly during a cycle.
Check whether the plug is connected correctly.
If the error occurs repeatedly, please contact your authorized
dealer.
1011
No oil is detected.
Change the oil bottle if this is empty.
Make sure that you proceeded as per chapter "Adding/replacing
the lubrication concentrate [→ 106]" when inserting the oil bottle.
If the error occurs repeatedly, please contact your authorized
dealer.
1102
The water tank flap was opened
whilst the chamber is closed or
open.
Close the water tank flap.
If the error occurs repeatedly, please contact your authorized
dealer.
1303
Error in the drain area
Check the drain filter.
Check the drain connection and drain hose.
If the error occurs repeatedly, please contact your authorized
dealer.
1405
Error in the drain area
Check the drain filter.
Check the drain connection and drain hose.
If the error occurs repeatedly, please contact your authorized
dealer.
